MRC DRS4000, User And Technical Manual

Page: 51 / 88

Routine Operation 2-35 DRS4000 Receiver User and Technical Manual
3. Obtain the IP address for the receiver. See ”Review
Hardware Configurations” on page 2-14 .
4. At the remote PC, open your web browser, enter the
receiver IP address into the browser address field, and
press the
Enter key.
5. Observe the DRS4000 web browser page opens. See
Figure 2-48 .
Figure 2-48: Monitor Page - Typical
2.13.3 Perform Status Monitor
The procedure required to perform status monitor is provided in
the following steps. All steps are performed at the remote PC.
1. Verify the DRS4000 is connected to the PC web
browser per
“Connect to the Web Browser” on page 2-
34 .
Note When the receiver is on line and is actively receiving,
the
Antenna Metrics section of the page will display
the same values displayed on the DRS4000 Control
menu.
2. Select the Monitor Panels tab and verify the Monitor
Panels page is displayed. See Figure 2-49 .
Figure 2-49: Monitor Panels Tab - Typical