MRC DRS4000, User And Technical Manual

Page: 30 / 88

Routine Operation 2-14 DRS4000 Receiver User and Technical Manual
2.9.1 Review Hardware Configurations
The steps required to review the hardware and software/
firmware provided in your DRS4000 are contained in
Figure 2-
14 .
Figure 2-14: Review Hardware Configurations
Control menu is
displayed
Select Setup and
press OK
Setup Menu is
displayed
Select Hardware
Configuration and
press OK
Hardware
Configuration
menu
is displayed
Review data, as
required, and press
Back until Control
menu is displayed
2.9.2 Select RF Switch Matrix
The steps required to select the RF switch matrix for block
downconverters BDC 1 thru BDC 4 are provided in
Figure 2-15 .
Figure 2-15: Select RF Switch Matrix
Control menu is
displayed Select Setup and
press OK
Setup Menu menu is
displayed
Select RF Switch
Matrix and Input
Routing
and press
OK
RF Switch Matrix
menu is displayed
Select IF Source and
select BDC #1 or
External
NOTE
If the same input
option is selected for
more than one source,
an error screen will be
displayed and the
input will be rejected.
Select BDC #1 or
External and select
Input A thru Input D ,
as required
Select BDC #2 and
select the input
required
Select BDC #3 and
select the input
required
Select BDC #4 , select
the input required, and
press
OK
Select Decoder Input
and select ASI or
COFDM , as required
Control menu is
displayed