Operation Manual
5 of 18
1.2 SAFETY INFORMATION:
Use the instrument only as specified in this manual. Otherwise, the protection provided
by the instrument may be impaired. Refer to the safety information below and
appearing throughout the manual.
A.
WARNINGS:
This calibrator is designed for interior use only.
Inspect the instrument for damage before each use.
Do not use the instrument if it appears damaged or operates abnormally.
If the instrument is used in a manner not in accordance with the equipment
design, the operation of the instrument may get damaged.
Do not place the instrument under a cabinet or other structure. Leave enough
clearance to allow for safe and easy insertion and removal of probes.
Do not use this instrument for any application other than the calibration work.
Any other use of the instrument may cause unknown hazards to the user.
Do not operate near flammable materials.
Calibration Equipment should only be used by Trained Personnel.
Completely unattended operation is not recommended.
Do not drop the probe stems into the well. This type of action can cause Shock to
the Sensor.
The fuse must not be removed from the socket until the power cord has been
disconnected.
Follow all safety guidelines listed in the user’s manual.
Do not leave the thermo well in the instrument for prolonged periods. It may
cause damage due to high operating temperature of the instrument.
Do not slam the probe sheath into the well. It may cause a shock to the
sensor and affect the calibration.
