Operation Manual
12 of 18
Insertion tube diameter is selected according to the diameter of the sensor to be calibrated.
The cal control will illuminate and the fan will begin quietly blowing air through the
instrument after the illumination of the cal control. Sensor is inserted in the insertion tube
and set the desired temperature in the display. Heater block gets heated and meets the
desired set temperature with the help of PID controller.
5.0 PARTS & CONTROLS:
5.1 GENERAL ASSEMBLY :
5.2
DISPLAY PANEL:
Green Display :
Process Temperature
Green LED :
Output Indicator
(Flashing green bulleted Square in the top left Corner)
Red LED :
Temperature Over range Indication, set for +10% of maximum
range of the instrument (flashing red bulleted square in the
bottom right corner
