Turning On/Off Accessories
1. Select desired accessory address
2. Press either the Left or Right button
Wiring Your AD360 For Accessories
1. Use power supply compatible with accessory
2. Jumper plug placed over appropriate pins on decoder
Signal LEDs can be used as part of accessory being lit (use your
imagination)
If the signal LEDs do not correspond with the accessory on/off,
(red-off / green-on), reverse either the red/green signal LED wires
or use the white wire from the decoder to the accessory, instead of
the yellow decoder wire.
DC operated accessories that are polarity sensitive, such as LEDs,
must be wired accordingly to the plus and minus terminals of your
power supply. The decoder only acts as an on/off switch. Please
refer to the accessory’s instruction manual for correct wiring.
5