MRC DISPATCHER
TRACKSIDE DECODER
(Item AD360)
Congratulations!! You have just purchased an
advanced DCC accessory decoder. Combined with
the MRC
PRODIGY
DCC system or any
manufacturer’s DCC system, the MRC AD360 will
make your model railroad more exciting. Thank you
for purchasing MRC products.
•
Designed for use in any scale with any DCC system
•
Programmable up to 127 (1-127) addresses
•
Designed to operate either twin-coil or slow-motion
switch motors, and other accessories
•
Dual function programming (absolute and reverse
polarity)
•
Includes red and green signal LEDs to show turnout
status
• 3 amp capacity
Since the MRC Dispatcher Trackside Decoder does
not power the turnout switch motors, it is possible to use
one decoder for more than one turnout, if needed, such
as in a crossover situation where both turnouts must be
thrown simultaneously.
Each AD360 should be programmed on a separate
programming track prior to installation so you do not
reprogram all your locomotives or other trackside
decoders.