mr
.
steam
®
Installation & Operating Instructions
_________________________________________________________________
7
Drawings for Illustrative Purposes Only.
Step 2
Diagram 1
Make a 2-5⁄8” wide by 3-7⁄8” high cutout
in the desired control location. Do not
oversize or under size the cutout.
Step 3
Diagram 2
Route the control cable (provided with the
control) from the wall cutout to the steam
generator. Connect one end of the cable to
the steam generator connector.
NOte:
The connector is keyed with the
flat facing up. The control cable is the same
at both ends.
Step 4
Diagram 3
Firmly connect the other end of the
cable to the control. Turn on power to
the steam generator and test the control
to verify correct connections. Test per
the instructions on pages 10-15. With
verification of proper control function,
proceed to Step 5.
If the generator is on for
more than a few minutes steam will start
coming out of the steamhead. Insure that
the steam room is not occupied.
DiaGram 3
DiaGram 4
DiaGram 2
CaUtiON
!