mr
.
steam
®
Installation & Operating Instructions
_________________________________________________________________
11
mr.steam
temp
aroma chroma
time
mr.steam
temp
aroma chroma
time
The iTempoPlus Control features programmable
temperature control, programmable time duration,
clock, AromaSteam, ChromaSteam
®
, ON/OFF and
two personal settings.
Set the steam bathing temperature
according to personal preference, however it is highly
recommended to begin steam bathing at a low
temperature setting for a very short duration to gauge
comfort and safety levels.
pOWeriNG Up tHe UNit
Diagram 1
When the generator is first powered up or after a
power interruption, the clock display flashes and the
clock is ready to be set up.
NOte:
Pressing the ON/OFF will start the generator
even if the clock has not been set.
NOte:
The clock can only be set when the generator
is OFF, the display is flashing.
SettiNG tHe CLOCK
ON/OFF
Diagram 2
Press the ON/OFF key to start or stop the flow of
steam. The Temperature Set Point is displayed. Steam
will begin to flow a few minutes after the control is
turned ON. The duration required for the steam room
to reach steam bathing temperatures depends on the
steam room construction and steam generator speci-
fications. Steam may continue to flow for a short time
after the control is turned OFF.
itempoplus
®
Operating instructions
DiaGram 1
DiaGram 2
Drawings for Illustrative Purposes Only.
WarNiNG
!