3
Operating Instructions and Owner’s Manual
Grand Teton Wood Pellet Fire Stove
*BTU input/output will vary, depending on the brand of fuel you use in your Stove
** Depending on climate zone. Variations in climate and location affect attributes such as stove efficiency
and CO produced.
SPECIFICATIONS
Model #
PS60WTS
PS130TS
PSBF66WTS
DIMENSIONS
Stove Weight
[LBS (kg)]
198 (90)
221 (100)
265 (120)
Stove Dimensions LxWxH [in (cm)]
23.5” x 21.75 “ x 33.25”
(59.7 x 55.2 x 84.5)
24.0” x 24.5 “ x 36.5”
(61.0 x 62.2 x 92.7)
26.18” x 24.53 “ x 30.39”
(66.5 x 62.3 x 77.2)
Air Inlet Pipe Diameter [in (mm)]
2” (50)
2” (50)
2” (50)
Air Outlet Pipe Diameter [in (mm)]
3” (80)
3” (80)
3” (80)
Pellet Hopper Capacity
[LBS (kg)]
60 (27.2)
130 (59.0)
66 (29.9)
OPERATION SPECIFICATIONS
Fuel
Wood Pellet
Wood Pellet
Wood Pellet
Heats approximately **
[ft
2
(m
2
)]
1500 (139.4)
2500 (232.3)
1800 (167.2)
Carbon Monoxide Produced
(g/min)
0.59 on High
0.77 on Low
0.00 on High
0.15 on Low
0.00 on High
0.09 on Low
Pellet Consumption Rate Low [LBS/HR
(kg/HR)]
1.43 (0.65)
2.4 (1.09)
1.48 (0.67)
Pellet Consumption Rate Medium
[LBS/HR (kg/HR)]
1.81 (0.82)
2.47 (1.12)
2.16 (0.98)
Pellet Consumption Rate High [LBS/
HR (kg/HR)]
4.01 (1.82)
6.04 (2.74)
4.59 (2.08)
Stove Efficiency
81.4%
78.7%
80.8%
Heat Output Rate Low [BTU/HR (kW)]
9,739 (2.85)
16,149 (4.73)
10,151 (2.97)
Heat Output Rate Medium [BTU/HR (kW)]
12,537 (3.67)
16,644 (4.88)
14,792 (4.34)
Heat Output Rate High [BTU/HR (kW)]
28,165 (8.25)
39,460 (11.56)
31,107 (9.12)
ELECTRICAL SPECIFICATIONS
Electrical Supply Requirements
[Voltage / Frequency / Phase]
120V / 60 Hz / Single
120V / 60 Hz / Single 120V / 60 Hz / Single
Electric Current During Lighting Phase
[Amperes]
3.3
3.3
3.3
Auger Motor R.P.M.
2.4
2.4
2.4
This manual describes the installation and operation of the brand “Grand Teton” wood pellet fire stove. This stove
meets the applicable U.S. Environmental Protection Agency’s emission limits for pellet fired heaters sold after
2020. Under specific test conditions these stoves have been shown to deliver heat at rates ranging from:
PS60WTS: 9,739 to 28,165 Btu/hr
PS130WTS: 16,149 to 39,460 Btu/hr
PSBF66WTS: 10,151 to 31,107 Btu/hr
