DCA125SSIU4F 60 HZ GENERATOR• OPERATION MANUAL — REV. #0 (07/20/17) — PAGE 49
MAINTENANCE
HOW TO ACTIVE ESCAPE MODE
If the ECU displays any messages referenced in Table 18,
it may be necessary to restart via ESCAPE MODE.
Starting
1. Start the Diagnostic Mode as referenced in the
"Troubleshooting Diagnostics" section in this manual.
2. Exit the Status Check Screen by pressing the [
EXIT
]
button (Figure 71).
Figure 71. Status Check Screen
(Diagnostic Mode)
3. Next, press the [
Program/Exit
] button (Figure 72) to
enter the Main Menu.
DEF
E
F
E
F
STATUS CHECK
HOURS
00018.3
CANBUS IS WORKING OK
EXIT
26.8v
[EXIT]
BUTTON
DIAGNOSTIC MODE
Figure 72. Main Screen
4. Press the [
DOWN
] button (Figure 73) to scroll to the
Escape Mode item.
Figure 73. Main Menu (Down Button)
Alarm
Screen
Change
Program
Exit
Option
[PROGRAM EXIT]
BUTTON
DEF
E
F
E
F
CANBUS IS WORKING OK
SPEED
0000
[DOWN]
BUTTON
FAULT DIAGNOSTICS
ABOUT UNIT
USER LOGIN
ESCAPE MODE
UP
DOWN SELECT
