PAGE 20 — STXDF TROWEL • SETUP, ADJUSTMENTS AND CALIBRATIONS — REV. #0 (11/05/18)
9. Record program ID and version on Machine Information
and Maintenance Log on the front of this manual.
10. Turn machine power off for at least 10 seconds prior
to proceeding with machine setup.
PARAMETER FILE TRANSFER
1. Turn key to RUN position but
DO NOT
start machine.
2. Click on "Stop Logging" button (Figure 29).
Figure 29. Stop Logging Screen
LOADING SOFTWARE
3. Click "Download all parameter values" button.
4. After selecting "Download parameters to MCU", a new
dialog box will pop up (Figure 30).
Figure 30. Download all Parameter Values Screen
5. Select "0,39-43048" then click OK.
6. Select 43049__*.p1t file and select open.
7. Turn machine power off for at least 10 seconds prior
to proceeding with machine setup.
