PAGE 28 — CA4HC WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #1 (06/24/20)
5. Place the engine ON/OFF switch in the
ON
position
(Figure 24).
Figure 24. Engine ON/OFF Switch (ON)
6. Slowly pull the starter grip (Figure 25) until resistance
is felt, then pull briskly and smoothly to start the engine.
Gently return the starter grip to its original position.
Figure 25. Starter Grip
7. If the engine has started, slowly return the choke lever
to the
CLOSED
position (Figure 22). If the engine has
not started, repeat steps 1–6.
8. Before operating the trowel, run the engine for
several minutes and check for fuel leaks and loose
components.
ON
OFF
ENGINE SWITCH
STARTER GRIP
TO BEGIN TROWELING
Place the throttle lever (Figure 26) in the
RUN
position.
Figure 26. Throttle Lever (Run)
PITCHING THE BLADES
Standard Handle
To pitch the blades upward with the standard handle
(Figure 27), turn the star wheel clockwise. Turn the star
wheel counterclockwise to pitch the blades flat (no pitch).
Figure 27. Pitching the Blades
(Standard Handle)
THROTTLE
LEVER
RUN
POSITION
INCREASE
BLADE PITCH
(
CW
)
DECREASE
BLADE PITCH
(
CCW
)
BLADE PITCH
STAR WHEEL
OPERATION
To
order
go
to
Discount-Equipment.com
