8. Checking the battery:
The battery installed is of maintenance-free type and replenishment with electrolyte is not needed.
If voltage drops, replace with new battery because rapid charging is not possible.
a. Removing the battery:
1. With two M8 nuts removed, take off the battery cover.
2. Disconnect the battery terminals, starting with (-) terminal. For installation, start with (+)
terminal and connect (-) terminal lastly.
! Note:
When removing cables, use care not to allow short circuiting between (+) and (-)
terminals.
3. Take out the battery from the machine.
b. Checking and cleaning the battery:
1. Check the battery for crack or any
other damage.
2. Check the terminals for decay. If
decayed, polish it with wire brush
or emery paper, before coating the
terminals with grease.
3. Clean the externals of battery.
4. Check and clean the battery
stowing space of the machine.
Battery
Battery cover
(-) side
(+) side
Fig.38
Check vibration isolating mattress as well and replace as necessary.
25
Summary of Contents for Mikasa MVH120
Page 13: ...10 ...
