MVH-60, 120 AND 150
※
MVH-120 is used as an example:
Disassembling the driving shaft side:
5-1 With its mounting bolt (38) removed, pull out the
pendulum pulley (35) from drive shaft. Have the
key (6) removed as well (See Fig.12).
Fig.12
5-2 With its four mounting bolts removed, remove the
bearing cover (21) (See Fig.12).
5-3 With its four mounting bolts removed, remove
pendulum (18) and push out the drive shaft assembly
to the bearing cover side before removing the bearing
(See Fig.12).
5-4 As shown in Fig.13, remove upper stop ring
(5) and engage supports between the drive
gear (30) and inner surface of vibrator case.
Press the drive shaft from top and remove
drive gear within the vibrator case. The gear
having been pressed-in over the distance of
about 2cm, its removal will be easy beyond
that point.
Support
contraction stop ring
Remove upper
Fig.13
Press
5-5 Pull out the drive shaft from vibrator case.
13
Summary of Contents for Mikasa MVH120
Page 13: ...10 ...
