17
GB
6.
Do not immerse the base of the appliance in water or other liquids!
7.
If parts of the juice extractor change their colour due to carrots, oranges etc., such parts may
be brushed with a cloth and some food oil.
8.
After cleaning the juicer it should be reassembled.
PROBLEM SOLVING
Description of problem
Possible cause
Solution
The appliance does not turn on after
turning the switch
1. Improperly installed juice bowl/screen
2. Improperly fitted top cover
3. Improperly fitted pulp reservoir, juice bowl
and housing
1. Install the juice bowl/screen in the correct way
2. Install the top cover correctly
3. Install the pulp reservoir, juice bowl and housing
properly
The motor emits an unpleasant odour
during the first few uses
This is normal
If the motor still gives off an unpleasant odour after
the first few uses, take your appliance to the nearest
authorised service
The appliance heats up during
operation
1. Supply voltage too low
2. Too many fruits/vegetables in the appliance
3. Ingredients are pushed in with too much force
1. Check the supply voltage
2. Switch off the device. Remove excess fruits/vegetables
3. The products should be pushed in with a smaller force
The juice contains a lot of pulp
1. Damaged screen
2. Too much pulp on the screen
1. Replace the screen
2. Clean the screen
The device vibrates during operation
or is too loud
1. Improperly installed screen or the appliance is
filter improperly levelled
2. The appliance is set on an unstable surface, or
one of the feet is missing
3. Too many fruits/vegetables in the appliance
4. Improperly installed waste bin
1. Place the screen in the correct place
2. Place the device on a stable surface or mount the foot
3. Switch off the device. Remove excess fruits/vegetables
4. Install the waste bin properly
Low quality of juice
1. The screen has a lot of pulp
2. Ingredients are pushed in with too much force
1. Clean the screen
2. The ingredients should be pushed in with a smaller force
Blade
Blade is blocked by pieces of fruit/vegetables
Disconnect the device from the mains. Remove the
products and cut into smaller pieces.
SPECIFICATIONS
The technical parameters are given on the data plate of the product.
Maximum operating time:
KB max = 60 sec.
Time interval before re-use:
2 minutes
Noise level:
L
WA
= 80 dB
Power cord length:
1,25 m
NOTE! MPM agd S.A. company reserves the right to technical changes.
PROPER DISPOSAL OF THE PRODUCT
(waste electrical and electronic equipment)
Poland
This symbol on the product indicates that the product, after its lifetime, should not be disposed with other
household wastes. To avoid harmful influence on the environment and human health due to uncontrolled
waste disposal, dispose the waste device to the service point of waste household appliances or report
collecting it from home. In order to obtain detailed information about the location and how to dispose the
waste electrical and electronic equipment in a safe way, contact your retailer or local Department of Environmental
Protection. Do not dispose the device with other municipal waste.
Summary of Contents for MSO-10M
