MPM MMW-02, User Manual

Page: 22 / 52

22
EN
2.
Additional attachment (3 mm or 6 mm) are used for short hair-
styles.
3.
For longer hair on top, use the provided attach-
ment and lift the hair up at the top of the head.
Lift the hair or hold it in your fingers and then cut
it to the desired length – Figures 9 and 10 (always
from the back of the head).
4.
Gradual shortening of hair can be achieved by
reducing the space between the comb, fingers
and head. Brush the hair and check that the
strands are even.
STEP 5 - FINISHING
1.
finally, set the lever to short position and even
hair at the bottom of the neck, on sides of the
neck and around ears (without additional attachments).
2.
In order to get straight sideburns, turn the ma-
chine over and cut in this position – Figure 11.
3.
Press the clipper at a right angle to the head
– tips of blades should touch the skin lightly.
Move the clipper slightly downwards. In this
way, a very short cut can be achieved.
HAIRSTYLES CUT SHORT FROM THE BOTTOM
1.
Starting with the longest additional attachment,
trim from the bottom of the neck upwards. Hold
the attachment flat against the head and slowly
move the clipper through the hair – see Figure 12
2.
Follow the same procedure and cut from the
bottom side upwards – as shown in the picture.
3.
Then trim the hair in the opposite direction of
the hair growth – from the front to the tip and then even the cut
to the sideburns.
Figure 9
Figure 10
Figure 11
Figure 12