MP Systems AK CB20, Installation, Operation & Maintenance Manual, Page: 56 / 81

50 MPSYSTEMS-M-001/06
9.5.2. Plumbing Instructions (MC)

Ensure 1/2” black push lock hose from drain of MP1200, bottom of unit, connects to the 1/2"
hose barb on top of return of the R Series. Refer to B MP1200 INSTALL manual supplied with
MP 1200 mist collector;

Install supplied 6” flange on top of machine tool working cabinet;
o
Install away from direct coolant spray to avoid heavy fluid particles entering MP 1200
filter system.
o
Heavy liquid particles will greatly reduce filter life and performance.

With 6” flange installed on machine tool, it may be necessary to use hard piping to allow for a
slight slope. The slope will allow the remaining liquid to return to machine tool cabinet;
o
If using supplied 6” polywire hose, a rigied support bracket may need to be constructed
to allow the hose to have a slope and stay in place.

Avoid sagging of 6” polywire hose leading to MP 1200;
o
Less sag will help prevent fluid from collecting and potentially become ingested by MP
1200.
This information does not represent all installations. Machine tools and installation setups
may vary depending on available space and materials.
MACHINE
TOOL
MP1200
PUMP
BARB
90
o
PIPE
BRACKET
U-BOLT
FLUID SPRAY