MP Filtri LPA2 User Manual Download Page 8

Page: 8 / 72

Online Operation

3 Online Operation

1. Insert

WASTE FLUID HOSE

in to the waste disposal bottle pro-

vided.

Important! Do not connect Waste Fluid Hose to a pressurised

system, as this will cause the Analyser to malfunction and could

cause internal leakage. The Waste Fluid Hose must be dis-

charged into the waste disposal bottle provided, or into a tank/ves-

sel vented to atmosphere.

2. Connect

WASTE FLUID HOSE

to Analyser (waste connector). Push

back quick coupling outer ring before connecting / disconnecting

hose end.

3. Connect

FLUID SAMPLING HOSE

to Analyser (HP connector)

4. Connect

FLUID SAMPLING HOSE

to the system by means of the

minimess connector.

The system to be monitored must not exceed 400 bar or be less

than 2 bar

5. Press

GREEN BUTTON

to switch on Analyser the "Main / test

progress screen’’ will be displayed.

To prolong battery life it is advisable to switch oﬀ the Analyser

when not in use.

Summary of Contents for LPA2









































































Search results

Summary of Contents for LPA2

Reviews:

Related manuals for LPA2

Brands by name

Popular brands

MP Filtri LPA2, User Manual

Search results

Summary of Contents for LPA2

Reviews:

Related manuals for LPA2

Brands by name

Popular brands