MP Filtri BS110, Operator'S Manual

Page: 31 / 36

RELATED PRODUCTS
Priming the pump causes
a vacuum inside the bottle,
syphoning fluid from the
reservoir.
The design of the pump means
that only the hose is in contact
with the fluid protecting the
quality of the sample.
The sample level should always
finish below the level of the
hose. The bottle can now be
removed and capped.
For systems where there is no practical access to a
test point, a sample may need to be taken from an un-
pressurized reservoir.
For this occurrence we offer a simple hand pump device
with both off-line sampling products which provides for
clean and efficient sampling.
The design ensures that only the hose is in contact with the
sample fluid, providing greater confidence in analysis, and
we provide a range of adapters to suit our various bottle
sizes.
The pump can be fully dismantled for cleaning and the
sample hose plus main seal can be replaced to further
improve clean practise.
- Ultra clean bottles cleaned to and in accordance with
DIN/ISO 5884.
- Ultra clean bottles cleanliness verified to ISO 3722.
- NAS 1638 cleanliness certification of between
Class 00 and Class 0.
100 ml - Ultra Clean Bottle (Certified)
100 ml - Standard Bottle Brown Glass
100 ml - Clear Plastic Bottle
100 ml - Standard Bottle Tray (72 bottles)
210 ml - Ultra Clean Bottle (Certified)
210 ml - Standard Bottle
500 ml - Standard Bottle
P.02
BS0016
7.111
BS0072
P.03
8.054
8.328
Ø 50x92
Ø 50x91
Ø 51x92
N/A
Ø 65x130
Ø 65x122
Ø 82x152
Descriptions Part Code Dimensions (mm)
HAND PUMP DEVICE
HOW IT WORKS
Operators Guide
29