4. Sightly uplift the spoke plate and rotate clockwise so that retention spokes
move away from holes to leave them open for loading (Ref. Fig. 5).
Fig. 5
5. Load sample tubes into the cavities of the sample holder, so that they fit
snugly in the holes. It is
preferred
to position the tubes symmetrically.
6. When all the sample tubes are loaded, place this assembly into the
®
FastPrep -24 Instrument. Align the locking pin of Aluminium three steps with
the holes under the Tube Holder, ensuring its proper placement (Ref. Fig. 6).
Fig. 6
10
Retention Spoke Plate
Sample Holder
www.mpbio.com
Locking Pin
Hole Under the Tube
(for matching)
Aluminium
Three Step
