2.4 Connecting the Power
®
The FastPrep 24 can work on 110 VAC/60 Hz or 220 VAC/50 Hz. Make sure the
rocker switch located on the rear panel is OFF when connecting the power.
Connect the power cord to the Instrument (power fixture is at the back side) and
plug it in to a compatible outlet.
This symbolizes Alternating Current
III OPERATION
3.0 CONTROLS & FUNCTIONS
Functions of control panel keys
are given below (Ref. Fig. 2)
1.
SET
Key - Press this key to select
Speed & Time as displayed on
LCD
Speed: Selectable from 4.0 m/s
to 6.5 m/s. In steps of 0.5 m/s
(Default 4.0 m/s).
Tube holder: Selectable
Time: Selectable from I sec. to
60 sec. in steps of I second.
(Default 20 seconds)
2.
RUN
Key - To Start or Stop the
Instrument.
3. Key - To Increase the selected
value of speed, tube holder &
time.
4. Key - To Decrease the
selected value of speed ,tube
holder & time.
Fig. 2 (Control Panel)
and to choose program
(model 6004)
list of
tube holders
7
www.mpbio.com
FastPrep
®
24
RUN
SPEED
TIME
SET
1
2
3
4
LCD
-
