Mozaex™ ShowStar User Guide
22
Installing 3
rd
Party Software with FlashLoader Utility
If you decide to install 3
rd
party software it is best to use the FlashLoader utility which
allows you to connect a USB Flash memory device and then run the software installer.
Follow these steps to install software onto the ShowStar:
1.
Connect a USB memory device to a USB connector on the front or rear panel.
2.
The FlashLoader utility will appear and display the software or media to load.
3.
Select and run the software installer. (A future version of the FlashLoader is
expecte to be released that will allow you to select a destination where you
want to load media such as Photos, Videos and Music.)
4.
After running any new software installer perform a graceful power down by
momentarily pressing the Power Button and then re-power it back up.