5
5. OPERATING INSTRUCTION
Illustration of Control Panel
1.
Press and hold the front panel POWER button
for one second – the POWER LED will
now illuminate green indicating that the pump is operating.
2.
The Max LED and all comfort levels LED on the front panel will
blink during auto firm
inflation. After the mattress is fully inflated (takes approximately 30~40 minutes), the patient
can be transferred to the mattress.
3.
Alternate cycle time can be adjusted using CYCLE TIME button
.
4.
Press the button
to adjust comfort level, 1 stands for low, 4 stands for medium
and 7 stands for strong level.
6. MAINTENANCE
Proper care and maintenance are essential to keeping eMOTION Alternating Pressure Mattress
System in a safe operating condition. In addition to inspecting the unit before each use, periodic
maintenance checks should also be done.
Inspect the mattress before each use. Ensure all hardware and accessories are secure and the
pump is functioning properly
Service and repair must be done by qualified personnel ONLY.
Unauthorized modification of the Mattress System or the use of non- eMOTION replacement
parts may change the structure of the Mattress System and could create a hazardous condition,
which may result in serious injury and will void the warranty.
The pump contains no serviceable components. DO NOT attempt to open the pump. If service is
required, consult MOXI’s tech support for further information.
Summary of Contents for eMOTION
Page 30: ...AL300446 V1 00...
