VPort 2110 User’s Manual
Getting Started
2-8
Powering on VPort 2110 Video Server
After all cables are correctly and firmly connected, turn on all peripheral devices, including
cameras, sensors, and alarm devices. And then connect the VPort 2110 to the power supply.
After being powered on, the VPort will automatically detect if an external modem is connected to
the modem port. As soon as an external modem is detected, the
CONNECT
LED will blink
periodically. If no modem is detected, the VPort will assume that the included null modem cable is
connected to perform system configuration. Both
CONNECT
and
SERIAL
LEDs will show as
“steady on” until the dial-up connection over the null modem is established.
Configuring a Modem (Under Windows 2000 environment)
Install a new modem
Null Modem Mode
1.
Click on
Start
Æ
Control Panel
Æ
Modems
.
2.
An
Install New Modem
message will appear. Check
Don’t detect my modem; I will select
it
from a list, and click on
Next
to continue.
