- 5 -
DIN-Rail Mounting
There are 2 options for DIN-rail mounting that can be adopted on a
SDS-3016. Option 1 is the default type when shipped.
Option 1 (Default):
When shipped, the metal DIN-rail mounting kit is fixed to the back panel
of the SDS-3016. Mount the SDS-3016 on the corrosion-free mounting
rail that adheres to the EN 60715 standard.
Suggested Installation Method
STEP 1—
Insert the upper lip of
the DIN-rail kit into the
mounting rail.
STEP 2—
Press the SDS-3016
towards the mounting rail until it
snaps into place.
Suggested Removal Method
STEP 1—
Pull down the latch on
the DIN-rail kit with a
screwdriver.
STEPS 2 & 3—
Slightly pull the
SDS-3016 forward and lift up to
remove it from the mounting
rail.
Option 2 (when side cabling is needed):
The metal DIN-rail mounting kit can be fixed to the side panel (mold side)
of the SDS-3016 (horizontal or vertical). Mount the SDS-3016 on the
corrosion-free mounting rail that adheres to the EN 60715 standard.
