- 15 -
Configuration and Log Files Back Up
When the ABC-02-USB is connected to the industrial smart Ethernet
switch, the reset button allows for a quick back up of configuration and
event logs to the ABC-02-USB. Press the reset button on top of the
SDS-3016 in order for the industrial smart Ethernet switch to start
backing up the current system configuration files and event logs to the
ABC-02-USB.
NOTE
When the ABC-02 is plugged in, you can’t reset to factory default
by pressing the reset button.
LED Indicators
LED
Color
Status
Description
Per Device LED
PWR 1
Amber
Solid light Power is being supplied to the
main system’s power input PWR1
Light off
Power is not being supplied to the
main system’s power input PWR1
PWR 2
Amber
Solid light Power is being supplied to the
main system’s power input PWR2
Light off
Power is not being supplied to the
main system’s power input PWR2
STATE
Green
Solid light System has passed self-diagnosis
test on boot-up and is ready to run
Blinking
1.
System is undergoing the
self-diagnosis test
2.
System detects that the
ABC-02-USB is plugged in and
has been detected by the USB
port
3.
Blinks continuously when the
reset button is pressed for 5
seconds to reset to factory
default settings
Red
Solid light System failed self-diagnosis on
boot-up.
FAULT
Red
Solid light 1.
System is in the event of
failure, or is under quick
inspection
2.
Invalid port connection
3.
When the Relay DO is
triggered
Blinking
1.
RAM test failed / switch
initialization failed
2.
Firmware checksum failed /
Uncompressed failed
Light off
The system is operating normally
STATE +
FAULT
STATE: Green
FAULT: Green
Rotate
Blinking
Sequentially
ABC-02-USB is
importing/exporting files
