Hardware Installation
Industio
CI-134 Series User’s Manual
2-3
CAP jumper J P1
. The software and hardware configuration will be completed at the
same time while doing the software configuration, detailed in the next chapter. Of
course, the method is valid only under the previously described circumstances.
Besides, the speed range will be set to
fr om 50 to 921.6K bps
by default
, which is
called
High Speed Spectr um
and detailed in section "Hardware Installation with
IO-IRQ Utility".
How to Do Quick Hardware Installation
1. Shor t the jumper J P1
on the upper-left corner of the board.
2.
Plug the board in PC with the desired system installed (Windows NT or 95/98),
which is powered off in advance.
3.
Do software (driver) installation, detailed in the next chapter.
This is to specify the desired I/O address, IRQ and INT Vector in the software
configuration panel, no matter what hardware settings are on the board. The
software configuration program will automatically update the hardware settings.
After this, users already complete the whole installation.
4.
Shutdown the system (Windows NT or 95/98).
5.
Do power off and then on (or Reset) the PC. (
Please cold star t.
)
6.
Restart System (Windows NT or 95/98).
It is very important to keep the JP1 always short in this case. Without running the
hardware configuration program, Io-irq.exe under DOS prompt, the software
configuration program will automatically update the hardware settings of the
board while updating the software settings. This saves the trouble doing hardware
configuration. However, remember to
cold star t the system ever y time the
configur ation changed
.
