- 8 -
is inactive
AMBER
On
The corresponding port’s 10 Mbps link is
active
Blinking Data is being transmitted at 10 Mbps
Off
The corresponding port’s 10 Mbps link is
inactive
P1 to P8
(PoE+ ports)
GREEN
On
The corresponding port is connected to
an IEEE 802.3at power device
Blinking
Over current or short circuit on the
power device with IEEE 802.3at
standard
Off
The corresponding port is not connected
to a power device with IEEE 802.3at
standard
AMBER
On
The corresponding port is connected to a
power device with IEEE 802.3af
standard
Blinking
Once per second:
Detecting error on the power device
Twice per second:
Over current or short circuit on the
power device with IEEE 802.3af
standard
Off
The corresponding port is not connected
to a power device with IEEE 802.3af
standard
Specifications
Technology
Standards
IEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols
IGMP v1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, BootP, TFTP, SNTP, SMTP, RARP, RMON,
HTTP, HTTPS, Telnet, SSH, Syslog, DHCP Option 66/67/82,
EtherNet/IP, Modbus/TCP, LLDP, IEEE 1588 PTP V2, IPv6,
NTP Server/Client
MIB
MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control IEEE 802.3x flow control, back pressure flow control
Interface
Fast Ethernet 8-port 10/100Base T(X) or PoE+ 10/100BaseT(X)
2 modular slots for any 8-, or 6-port Interface Modules
with 10/100BaseT(X), 100BaseFX (SC/ST connector),
