- 6 -
Use Moxa’s USB Automatic Backup Configurator ABC-02-USB to connect
to the USB host port to backup and restore configuration files, auto-load
configuration files, upgrade firmware, and backup system log files.
The Reset Button
Depress the Reset button for five continuous seconds to load the factory
default settings. Use a pointed object, such as a straightened paper clip or
toothpick, to depress the Reset button. When you do so, the STATE LED
will start to blink about once per second. Continue to depress the STATE
LED until it begins blinking more rapidly; this indicates that the button has
been depressed for five seconds and you can release the Reset button to
load factory default settings.
NOTE
DO NOT power off the switch when loading default settings
LED Indicators
The front panel of the IKS switch contains several LED indicators. The
function of each LED is described in the table below.
LED
Color State Description
System LEDs
PWR1*
AMBER
On
Power is being supplied to the main
module’s power input PWR1
Off
Power is not being supplied to the main
module’s power input PWR1
PWR2*
AMBER
On
Power is being supplied to the main
module’s power input PWR2
Off
Power is not being supplied to the main
module’s power input PWR2
EPS1
AMBER
On
Power is being supplied to the PoE+
power input EPS1
Off
Power is not being supplied to the PoE+
power input EPS1
EPS2
AMBER
On
Power is being supplied to the PoE+
power input EPS2
Off
Power is not being supplied to the PoE+
power input EPS2
*: On the IKS-6700A/IKS-6728A-8PoE-4GTXSFP-48-48-T model, both
PWR1 and PWR2 LED will be “On” with a single power input. This is
because both internal power units are operating as redundant secondary
power with the single input.
STATE
GREEN
On
System has passed self-diagnosis test
on boot-up and is ready to run
Blinking
1. System is undergoing the
self-diagnosis test
2. Blink continuously when pressing the
reset button 5 seconds to reset to
factory default
