Moxa Technologies AWK-4121, User Manual

Page: 37 / 76

AirWorks AWK-4121 User’s Manual Web Console Configuration
Beacon Interval (for AP mode only)
Setting Description Factory Default
Beacon Interval
(40-1000 ms) This value indicates the frequency
interval of the beacon 100 (ms)
DTIM Interval (for AP mode only)
Setting Description Factory Default
Data Beacon Rate
(1-16384) This value indicates how often the
AWK-4121 sends out a Delivery
Traffic Indication Message 1
Fragment threshold
Setting Description Factory Default
Fragment Length
(256-2346) This parameter specifies the
maximum size a data packet before
splitting and creating another new
packet 2346
RTS threshold
Setting Description Factory Default
RTS/CTS Threshold
(256-2346) This setting determines how large a
packet can be before the Access Point
coordinates transmission and
reception to ensure efficient
communication 2346
NOTE
You can refer to the related glossaries in Chapter 5 for more detailed information about the
above-mentioned settings. By setting these parameters properly, you can better tune the
performance of your wireless network.
WLAN Certification Settings (for EAP-TLS in Client mode only)
When EAP-TLS is used, a WLAN Certificate will be required at the client end to support
WPA/WPA2-Enterprise. The AWK-4121 can support the
PKCS #12
, also known as
Personal
Information Exchange Syntax Standard
, certificate formats that define file formats commonly used
to store private keys with accompanying public key certificates, protected with a password-based
symmetric key.
Current status
displays information for the current WLAN certificate, which has been imported
into the AWK-4121. Nothing will be shown if no certificate is available.
Certificate issued to
: shows the certificate user
3-21