Operating
instructions
45
¨
3.3 Electrical
wheelchair
neutral
Put both free wheel levers (A) in the
D
RIVE
position to be able to drive the
wheelchair electrically.
To be able to push the wheelchair, put
both free wheel levers in the
P
USH
position.
•
Never put the wheelchair in the
D
RIVE
position when you are
parked on a slope. When the
wheelchair is parked on a slope
that is too steep, it can start
moving down the slope.
•
After pushing, the free wheel
lever should immediately be
returned to the D
RIVE
position.
•
The free wheel lever should only
be put in the Push position if the
wheelchair is to be pushed. In
the Drive position the automatic
parking brake is activated.
3.4
Switching on the DX
Activate the wheelchair by moving the
magnetic key from left to right across
the panel (A).
Press the ON/OFF key (B) to switch the
wheelchair on.
3.5
Switching on the Shark
To switch on the wheelchair, push the
on/off key (A).
When an electronics error is
detected, the battery indicator will
start flashing. The electronics are
blocked.
1
2
3
4
010402030
A
B
B
