148
04/2007
MOVIECAM COMPACT Mk2
7 – THE MOVIECAM CARRYING HANDLES
149
04/2007
MOVIECAM COMPACT Mk2
7 – THE MOVIECAM CARRYING HANDLES
Handling:
Mount this small handle to the Upper Carrying Handle
with one 5 mm hex screw
[a]
for easier camera hand-
ling.
SIDE HANDLE
Use the Side Handle when a Magazine is attached to
the camera top.
Handling:
Slide this handle onto the dove tail bracket (see
[3]
on
page 16 fig. 1/1) and tighten it with the knurled knob
[A]
. Screw the lower part of the handle into the rosette
(see
[23]
page 22 fig. 1/4) with fixing screw
[B]
. This
screw has a latch that permits easier handling.
The Side Handle is equipped with a tilting device which
allows pivoting the orientable Viewfinder Arm from
one side of the camera to the other, when top-mounted
1.000/300 magazines are installed.
Handling:
After softly pressing the release lever
[C]
, the upper part
of the Side Handle can be tilted forward in order to
give way to the bent Viewfinder Arm.
When the viewfinder is on the other side, the upper part
of the handle can be put upright again; it then locks
automatically.
FIG105
THE SIDE HANDLE
fig.7/3
[B]
[23]
[A]
[3]
[c]
[d]
[d]
[c]
threaded sockets
[d]
gauged boreholes
FIG106
THE SIDE HANDLE
fig.7/4
[C]
➞➞
[A]
knurled knob
[B]
latch of the fi xing screw