manualshive.com logo in svg

Moviecam COMPACT Mk2, User Manual, Page: 108 / 140

Share
Download
Moviecam COMPACT Mk2 User Manual Download Page 108

206

04/2007

MOVIECAM COMPACT Mk2

11 – OPERATING THE COMPACT MK2

207

04/2007

MOVIECAM COMPACT Mk2

11 – OPERATING THE COMPACT MK2

60.24

 

STAND BY 

   The camera is controlled by an external 

signal. Preset FPS: 24 forward. The selec-

ted RATIO

 [1]

 enables sync with 60 Hz.

 

 The preset frame rate is indicated by the 2 

figures at the far right of the display. 

72.24

 

STAND BY

 

 The camera is controlled by an external 

signal. Preset FPS: 24 forward. The selec-

ted RATIO 

[2] 

enables sync with 72 Hz.

50.25

 

STAND BY

 

 The camera is controlled by an external 

signal. Preset FPS: 25 forward. The selec-

ted RATIO

 [3]

 enables sync with 50 Hz.

75.25

 

STAND BY

 

 The camera is controlled by an external 

signal. Preset FPS: 25 forward. The selec-

ted RATIO 

[4]

 enables sync with 75 Hz.

10.025

 

STAND BY

 

 The camera is controlled by an external 

signal. Preset FPS: 25 forward. The selec-

ted RATIO

 [5]

 enables sync with 100 Hz.

60.30

 

STAND BY

 

 The camera is controlled by an external 

signal. Preset FPS: 30 forward. The selec-

ted RATIO 

[6]

 enables sync with 60 Hz.

75.35

 

STAND BY

 

 The camera is controlled by an external 

signal. Pre set FPS: 35 forward. The selec-

ted RATIO

 [7] 

enables sync with 70 Hz.

1. 1

 

STAND BY

 

 The camera is controlled by an external 

signal. 

 

 The fps depends on the signal frequency.

 

 The selected RATIO

 [8]

 or

 [9] 

engenders 

that the frame rate will be equal to frequen-

cy of the external sync signal.

68

 

For example

STAND BY

 

 The camera is controlled by an external 

signal. 

 

 The PHASE switch shows MAN. When 

Sync frequency is OK and the PHASE 

switch is raised (UP) or pressed (DOWN), 

the angle will be displayed.

 

Summary of Contents for COMPACT Mk2













































































































































Reviews:

No comments