Moviecam COMPACT Mk2, User Manual, Page: 136 / 140

262
04/2007 MOVIECAM COMPACT Mk2
12 – MISCELLANEOUS AND APPENDIX
263
04/2007 MOVIECAM COMPACT Mk2
12 – MISCELLANEOUS AND APPENDIX
CHAPTER 12
MISCELLANEOUS and APPENDIX
THE ASSISTANT WORK LIGHT
[a]
Work light shoe, bracket
[b]
On/off switch
[c]
Attachment screw
[7a] [7b]
Connectors
The Assistant Work Light can be mounted like a flash
to a still camera either on the MOVIELITE or on the
Readout Unit. After loosening the fixing screw, slide the
WORK LIGHT shoe into one of the several brackets
[a]
and tighten the screw
[c]
. Disconnect the camera,
then connect the short coiled cable (similar to that of the
Eyecup Heater) to one of the two connectors
[7a]
or
[7b]
.The Assistant Work Light is switched on by turning
its cap
[b]
. It is recommended to always carry a spare
bulb (24 V/4 W) with you equipment. Eyepiece Heater
and Assistant Work Light may be used together (but
keep an eye on the battery power consumption!).
FIG104
THE ASSISTANT WORKING LIGHT
fig.12/1
[7a]
[7b]
[b]
[a]
[c]