226
04/2007
MOVIECAM COMPACT Mk2
11 – OPERATING THE COMPACT MK2
227
04/2007
MOVIECAM COMPACT Mk2
11 – OPERATING THE COMPACT MK2
▲
Warning
The aperture ring must not be turned manually as
long as the gear wheel of the Iris Control Unit is
engaged in the aperture gear rim of the lens!
Should the aperture be changed, the aperture gear
rim can be operated manually after disengaging.
The lock lever
[B]
allows quick pivoting of the Iris
Control Unit .
A new input is not necessary as long as the right
aperture value is set when reengaging again. A
check is recommended nevertheless. In case the LED
starts flashing, a manipulation error has occurred; it
can be eliminated by repeating the input steps 1 to
5. In case the LED continues flashing, which indica-
tes a malfunction, the camera has to be disconnec-
ted for a while; thus the Iris Control Unit software is
reset.
THE MOVIESPEED REMOTE CONTROL UNIT
Connection:
The cable of the MOVIESPEED Remote Control Unit has
to be plugged in the Remote Socket
[33]
located on the
Camera Control Board.
THE MOVIESPEED REMOTE CONTROL UNIT
fig.11/8
CONNECTING THE MOVIESPEED REMOTE CONTROL UNIT
fig.11/9
[33]
