OPERATING MANUAL
Page 16 of 19
12
RETENTION MECHANISM FOR SLIPPERY GROUND
The retaining mechanism is used as needed to
stabilize the Track-O on slippery surfaces such as
ice, when using the capstan.
Retaining cylinders can be used in two ways,
directly on the chassis of the automotive Track-O
or on the safety skates
Lower the jacks so they lightly touch the ground,
without over lifting the Track-O.
13
INSTALLATION TO THE POLE
The capstan of the Track-O must be used at any
time with a pulley attached to the pole.
The capstan lever must be aligned as much as
possible with the cable axis.
IMPORTANT: DO NOT move the Track-O when the
winch is in use.
