BEFORE EACH HANDLING OPERATION WITH A TRACK-O:
Ensure that the load being moved is within the limits of weight recommended by
the manufacturer, depending on the model used, and this, as well as on flat
surface as inclined surface.
Ensure that the load is securely attached through the anchor eyelet.
Make sure the path does not have a bank angle greater than 15 degrees, and a
pitch or steeper than 40 degrees.
Never hesitate to do a dry run in order to best anticipate the space available to
maneuver.
DURING EACH HANDLING OPERATION WITH A TRACK-O:
Never use both remotes (wired and wireless) at the same time. One is enough and
may prefer the wireless remote (optional) for convenience.
Never stand downstream (below) the Track-O, but either side for wired remote
safe convoy, or outright upstream (above) of the convoy through the wireless
remote. This applies to both the operator and others in attendance in the scope of
the maneuver.
Never place hands near the track as the switch is turned OFF and the unit is not
completely still.
In all case, never stand below the Track-o and its load. If the load was to fall you
could be severely or mortally injured.
Before engaging the unit in an inclined, double check if the straps and anchor
points are in good condition and the unit responds well to the remote on the flat
surface.
