Movex ASEM 125, Manual

Page: 6 / 16

6 Manual
FUMEX ASEM 65/85/125
Manual
MOVEX ASEM 65/85/125
4 Preparation for use
Never work or stand underneath suspended
loads!
When lifting and/or replacing parts, it is
important that the lifting device is stable and
secured. Only use suitable and technically
sound lifting gear and load-bearing equip-
ment with sufficient capacity.
4.1 Transport & storage
Protect the machine and its parts from rain,
snow, aggressive atmospheres and other
harmful effects.
4.2 Electrical equipment
The equipment is fed with high voltage and
must always be equipped with a safety
switch for service work in connection with
the fan.
Note that electronic equipment is always sen-
sitive to static electricity, high humidity and
temperature as well as mains interference.
The choice of cable and cable area must comply with
the national requirements applicable to fixed installa-
tions. For electrical installation, see Section
10.2 Circuit
diagram electronics .
4.3 Assembly & installation
National rules and regulations must always be adhered
to during assembly work.
4.3.1 Unpacking
1. Carefully unpack the product.
When buying a hose reel without a hose,
leave the hose reel on the pallet to facilitate
installation of the hose.
2. Remove the wood screws securing the machine to
the pallet.
3. Check for any damage and missing parts. Contact a
local Movex representative directly if there is dama-
ge or parts are missing.
4. Dispose of the packaging material according to local
recycling regulations.
Fig. 4
4.3.2 Moving the machine
At least two people are required to move the
machine.
4.3.3 Hose reel excluding hose
Hose reels including fitted hoses are not co-
vered by sections
4.3.3 Hose reel excluding
hose to 4.3.5 Installing the hose.
Before installing the hose, set the drum position ac-
cording to
Fig. 3 and Fig. 4 . Follow the instructions in
section 4.3.5 Installing the hose .
Fig. 3
Ceiling mounting
Wall and floor mounting