Movex ASEM 125, Manual

Page: 10 / 16

10 Manual
FUMEX ASEM 65/85/125
Manual
MOVEX ASEM 65/85/125
7 Troubleshooting
Troubleshooting with the power switched
on may only be carried out by a licenced
electrician.
7.1 Troubleshooting guide
The troubleshooting guide contains information for
identifying faults which are simple to rectify. Always
perform the troubleshooting procedures before
contacting MOVEX.
8 Maintenance
Please remember that only original spare
parts may be used.
Make sure that all moving parts are secured to prevent
unintentional movement.
8.1 Cleaning
The product should be cleaned with clean cloths and
neutral detergents to avoid damage.
8.2 Maintenance schedule
Depending on the changing operating con-
ditions between the different systems, the
intervals for recommended maintenance
may differ. Users should therefore determine
their own maintenance intervals.
The checklist for maintenance is designed for normal
use of the machine. The recommended intervals are
approximate and refer to the time after the first start-up.
MOVEX recommends the following maintenance
schedule:
TROUBLESHOOTING GUIDE
Symptom Possible cause Recommended action
1. The hose does not stop
in the correct position.
Incorrect end positions have
been set.
Adjust the end positions; see section
4.3.8 Adjusting the end positions .
2. The motor cannot
retract the hose.
Hose is too heavy.
Use shorter or lighter hose; see torque under
section 10.1 Technical data .
Nozzle is too heavy. Use lighter nozzle; see torque under section 10.1 Technical data .
3. Noisy bearing.
The negative pressure in the
system is too high.
Lower the negative pressure (max. 2,500 Pa).
Bearing worn out. Replace bearing.
4. Poor suction.
Leakage in gasket/connection. Check that the gaskets and connections are tight. Rectify if necessary.
Foreign objects in suction tube. Check the suction tube. Remove any foreign objects.
Hole in hose. Check the hose and replace if necessary.
MAINTENANCE SCHEDULE
Interval Item Inspection module Maintenance instructions Date
As necessary
1.1
Hose Check that the hose is intact. Replace as necessary.
1.2
Hose reel Clean the hose reel externally with a damp cloth.
Every three
months
2.1
Hose Check the attachment of the hose.
2.2
Hose reel Check for leaks, damage and wear.
Once a year 3.1
Duct system Check dust accumulation. Clean if necessary.