![MOVEK myMix Owner'S Manual Download Page 24](http://html1.mh-extra.com/html/movek/mymix/mymix_owners-manual_1841164024.webp)
24
SD
Unit Name
PROFILE 5
BACK
IEX16L-1-Kick Drum
IEX16L-1-Snare
IEX16L-1-Bass
IEX16L-1-E-Guitar
IEX16L-1-Keyboards
6/28
SD
Unit Name
PROFILE 5
BACK
IEX16L-1-Input-15
IEX16L-1-Input-16
John - Ambience Mic
John - Click
John -Stereo Mix
14/28
SD
Unit Name
PROFILE 5
IEX-16L (74:6B:82:00:A1:23)-v1.45
RENAME
BACK
6/28
IEX-16L (74:6B:82:00:A1:2A)-v1.45
LOCK
FACTORY
DEFAULT
Besides input channels from other myMix or IEX-16L you can also select the mix of
other myMix devices (if it‘s „Send to Network“ is turned on) as long as you don‘t send
your mix to the network.
The LOCK/UNLOCK function is only
available through the CONFIG port of the
I E X - 1 6 L
, n o t v i a t h e c o m m o n
NETWORK port. If a IEX-16L has been
locked the softkey will read: UNLOCK
and you will prompted „Remote Device is
Locked“. See user manual
IEX-16L
for
further details.
Remote Channel Select
Remote Devices
Here you select the audio signals you
want to use for your local mix. All
available signals on the network- from
IEX-16L
and
myMix
are shown in a list.
Scroll to a channel and press the
encoder button to “Select” (green
check), or “Deselect” (red X).
Each
myMix
can select its individual
selection of up to 8 audio channel pairs
(= 16 audio channels) from the network.
The counter in the status bar shows the
total amount of network channels
currently available (right figure) and the
amount currently selected on the
myMix
(left figure). Because audio channels
are streamed in pairs you will see the
counter going up by two already when
you select the first input of a pair.
Note: If there are more than 16 channels (8 pairs) available myMix will automatically select the
first 16 (8 pairs). If you want to use other channels you have to deselect at least one pair (the
channel counter has to show 14/xx) before you can make a new selection.
Remote Devices is showing a list of available remote devices on the myMix network
like the
IEX-16L
16 channel line input expander. Select the unit you want to configure
from the list and press the encoder [4] to access it.