2
IMPORTANT! Read the following before operating myMix
1.
Read all safety and operating instruction before using myMix.
2.
Keep these instructions in a safe place for future reference.
3.
Heed all warnings and follow all instructions.
4.
Do not use the myMix unit near water, e.g. a bathtub, or swimming pool.
5.
Clean only with dry cloth, and keep moisture away from the unit.
6.
Do not block any ventilation openings. Install and use only in accordance with the
manufacturer's instructions.
7.
Do not install or use near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including power amplifiers) that produce heat.
8.
Protect the power cord from being walked on or pinched. Replace the power supply it
if the power cord or power supply shows signs of damage.
9.
Only use attachments and accessories specified by the manufacturer.
10. The myMix unit should only be used with a power supply as specified from the
manufacturer. If the provided plug of the power supply does not fit in your outlet,
consult your local dealer for the appropriate outlet.
11. Do not handle the power supply and other power cables with wet hands or on wet
floor to avoid the risk of electric shock.
12. Unplug the myMix unit during lightning storms.
13. Refer all servicing to qualified service personnel. Do not attempt to open the unit
yourself. Servicing is required when the myMix unit has been damaged in any way,
liquid has been spilled or objects fallen into the unit, the unit has been exposed to
water or moisture, does not operate normally, or has been dropped.
14. Exchanging the internal battery for memory should only be done by qualified
personnel. Note that exchanging the battery will return the unit in factory default
settings. Refer to your local dealer or the myMix tech support if in doubt.
15. Do not place any objects filled with liquids such as cups and glasses on the unit.
16. Excessive sound pressure level from earphones, headphones and speakers can
cause hearing damage and even hearing loss.
17. If anything drops into the media card slot, remove it after unplugging the power
supply or Ethernet cable (when using Power over Ethernet), or consult your technical
representative.
