10
QUICK START
?
Connect the external power supply and connect to the Fast Ethernet switch, or use
Power Over Ethernet from your switch- as soon as myMix has power it will boot up.
?
Navigation on
myMix
: with the jog wheel [4] you can select an item (e.g. input
channel, input type, …). Pushing it opens the dialogue, the soft keys allow for
additional functions and parameters.
?
If you are using myMix in different applications it is recommended to create a new
profile (SETTINGS
→
Profile
→
NEW) to have all your changes automatically stored.
?
If you plan to use the local inputs on your
myMix
, Name your unit (SETTINGS
→
Preferences) as you want others on the network to see you. Then select the input
type(SETTINGS
→
Inputs: Dual Mono, or Stereo, or Mono), activate phantom power
if needed and name your inputs. If your not using the local inputs select input mode
„None“.
?
If you use local inputs: turn both gain pots down and connect your microphones and
/or instruments, then adjust the gain for your inputs- you should see the green input
LED on. If the input LED turns red, turn the gain down (counterclockwise or away
from you).
?
Connect your outputs (headphones, in-ear system, speaker system)
?
myMix
automatically detects any channel on the network, but you can select which
channels you want to use for your mix. Go to SETTINGS
→
Remote Input Selection
and select up to 16 channels you want to use to create your mix. Channels in excess
of 16 will be automatically de-selceted and not show up on your main mix screen.
?
The large MUTE button [3] mutes all outputs.
?
To create your mix: use the jog wheel to scroll over the channel you want to edit, then
push it. Now you can change: volume, with the soft keys on the right also tone control
(more bass, or more treble) effects (you can change the type under SETTINGS
→
Effects, default is “Large Room”) and Panorama (if you are listening in stereo).
?
Mute and Solo are permanently available via soft buttons [6].
?
All mixer settings are automatically stored in your current profile.
?
If you want to record, insert a SD/ SDHC card [17] then press REC [5]. You can see
the time remaining on the card in the status bar. If you are finished recording, press
REC [5] again. Your mix and all individual tracks are saved in a folder „Session“
.
?
You can play back the individual tracks of a session and use the main mix page to
remix it, or use them on a computer with dedicated software (file format .wav, 48kHz,
24-bit). Go to Sessions to select a session and play it back. Play Along allows to use
the local inputs in additions the recorded tracks.
NOTE: SD/SDHC cards need to be compliant with SDA 2.0 and formatted in myMix (see
page 4).
