Moulinex Agilo, Manual

Page: 9 / 38

6
- Any action other than cleaning and normal
maintenance by the customer must be
performed by an approved Moulinex
service centre (see list in the “Moulinex
Service” booklet).
- If the mains cord or the plug are damaged,
do not use your appliance. In order to avoid
any accident, they must be replaced by an
approved Moulinex Centre (see list in the
leaflet "Moulinex Service").
- For your own safety, use only accessories
and spare parts which are suitable for your
appliance.
- Never place the appliance or its base in water,
under running water or in any other liquid.
- Do not vacuum up inflammable or explosive
substances (liquid, gas).
- Do not vacuum up incandescent waste (hot
ashes, embers, etc...)
- Do not vacuum up sharp items. If the
batteries leak, do not rub your eyes. Wash
your hands and if necessary rinse eyes with
clean water. If discomfort continues, see
your doctor.
Your appliance conforms to the 73/23 EEC
and 89/336 EEC directives.
I
NSTALLATION OF THE BASE
The base/charger ( A ) can be either :
- placed on a worktop
- or fixed to a wall (wall mounted support
provided)
Any excess cable can be wound up inside the
base.
C
HARGING
- Plug in the base/charger ( A )
- Place the appliance on its base/charger ( A ),
the indicator light will come on ( B3 ). While
charging, ensure that the indicator light is
on. Before being used for the first time, the
appliance must be charged for at least 16
hours.
U
SING YOUR HAND
-
HELD VACCUUM CLEANER
Your appliance and its accessories are
designed for 2 uses* : to vacuum up dust and
dust/liquids*.
- If necessary, place the desired accessory on
the container ( C ) :
• 1 crevice tool ( D ) for cleaning corners and
skirting boards, etc...
• 1 scraper* ( E1 ) for liquids/1 brush head*
( E2 ) to clean flat surfaces…
Setting-up/Using your
hand-held vaccuum cleaner
- Press the switch ( B1 ) to start the appliance.
- Replace it on its base after use.
To vacuum up liquids (only for non-flammable
and non corrosive liquids) :
- Use the scraper*.
- Do not go over the “FULL” level.
- Always empty the container before
replacing it on its base.
C
LEANING THE WATER
/
DUST CONTAINER
- Press the button ( B2 ). Remove the
container ( C ).
- Remove the permanent filter ( C1 ) from the
filter holder* ( C2 ) and empty it.
- Gently brush the permanent filter ( C1 ) or
wash it if necessary.
- Ensure that it is completely dry and then
replace it.
Note: Wash the container after each use
(dust or liquid) and dry the filter.
D
ISPOSING OF THE BATTERIES
Important
Your appliance contains nickel
cadium batteries.
- Before discarding your appliance,
remove the batteries ( F ) and
dispose of them safely
- Check that the appliance is correctly
positioned on its base/charger (A)
- Check that the cable is properly plugged in
and that the socket is working.
- It may be that the batteries are flat : replace
the appliance on the base/charger.
If you have followed all these instructions
and your appliance still does not work :
contact an approved Moulinex service centre
(see list in the “ Moulinex Service ” booklet).
HELPLINE: If you have any product problems
or queries, please contact our Customer
Relations Team first for expert help and
advice: 0845 602 1454 - UK
(01) 4751947 - Ireland
or consult our website - www.moulinex.co.uk
- Clean the filter regularly. Only a clean and
dry permanent filter will ensure maximum
suction power. Change the filter when
damaged. Do not use strong or abrasive
cleaning products.
Accessories
What to do if your appliance
is not working ?
1
2
4
3a
3b
5