36
2.12 How to Replace the Oil Pump
Do the steps below while referring to the following Exploded Views in Appendix.
A.1 M990T
B.1 MAIN BODY_FRONT A
1) Stop the treadmill after lifting up the unit at maximum by operating Incline Motor.
2) Turn off the unit power at the switch at the state of the treadmill lifted-up and then unplug the
line cord at wall outlet.
3) Remove three bolts (B20) and then lift
Motor Cover (T1) out from between the
upright Supports.
4) Locate the Hosepipe (M18) and Socket
(M17) under the bottom of the front Frame.
5) Turn the Socket (M17) in the direction
of arrow until the Oil Pump (M15) is
removed.
6) Re-assemble a new Oil Pump (M15) in
the reverse order of removal.
7) Re-assemble the Motor Cover in the reverse of removal.
Summary of Contents for M990T
