Gv224_01a_oi_e.docx / Okt-22
Page 14 / 17
5.
Technical Specifications
Technical Specifications
Power supply:
Input voltage:
Protection circuit:
Ripple:
Consumption:
Connections:
10 … 30 VDC
Reverse polarity protection
≤
10 % at 24 VDC
approx. 25 mA, with an unloaded encoder supply
screw terminal, 1,5 mm² / AWG16
Encoder supply:
Output voltage 1:
Output current:
Output voltage 2:
Output current:
Protection:
Connections:
Further possibilities:
24 VDC (ca. 0,8 V less than supply voltage)
max. 250 mA, (galvanically connected with the power supply)
5 VDC
max. 500 mA, (galvanically connected with the power supply)
short circuit proof
screw terminal, 1,5 mm² / AWG16, 9-pin
a)
Externally by a separate source
b)
By the same source that supplies the splitter
(10…30V)
Incremental input:
Signal levels (selectable):
Channels:
Frequency:
Connections:
RS422 / TTL (differential voltage > 0,5 V),
HTL Differential (differential voltage > 2 V),
HTL (asymmetrical
): LOW 0 … 6 V, HIGH 8 … 4
0 V
TTL (asymmetrical): LOW < 0,8 V, HIGH >2,0 V
asymmetrical: A, B, Z or symmetrical: A, /A, B, /B, Z, /Z
max. 1 MHz at RS422 / TTL
max. 500 kHz at HTL Differential
max. 250kHz at SE TTL / SE HTL
screw terminal, 1,5 mm² / AWG16
Incremental outputs:
Number of outputs:
Output logic:
Signal levels:
Signal delay time:
Output current:
Protection:
Connections:
2 (GT222), 4 (GT224/GV224)
resp. 8 (GT228/GV228),
push-pull
5 … 30 V
(can be supplied by respective ext. COM+ terminal)
approx. 160 ns
max. 30 mA
short-circuit proof
screw terminal, 1,5 mm² / AWG16
Potential separation:
GT222 / GT224
GT228
Potential separation between input and the outputs as well as
all outputs among each other.
Indicators:
Number of indicators:
Function:
2 LEDs
1 x green
for “ready for operate” state
1 x yellow for error detection at the inputs A, B, Z
