Motrex HAVN-100HMCIS User Manual Download | Manualshive

Page: 81 / 84

background image

LIMITATION OF LIABILITY

9. Neither DEALER nor its suppliers shall be liable to you or to any third party for any damages either direct, indirect, incidental,

consequential or otherwise (including in each case, but not limited to, damages for the inability to use the equipment or access data, loss
of data, loss of business, loss of profits, business interruption or the like) arising out of the use of or inability to use the Hardware even if
DEALER has been advised of the possibility of such damages.

10. Notwithstanding any damages that you might incur for any reason whatsoever, the entire liability of DEALER and any of its suppliers

shall be limited to the amount actually paid by you for the Hardware.

11. DEALER shall not be liable for

(I) any fraud on the part of its employees and/or agents; or
(I) any fraudulent misrepresentation on the part of its employees and/or agents.

12. Notwithstanding the above, neither party's liability for death or personal injury resulting from its own negligence shall be limited.

K_HM_[영어]_NAVI4.indd 51

2008-12-24 오전 8:39:29

«
...
79
80
81
82
83
...
»

Summary of Contents for HAVN-100HMCIS





















































































Reviews:

No comments

Related manuals for HAVN-100HMCIS

Stealthbox SB-HY-VELOSTR/10TW3

Brand: JL Audio Pages: 7

Brand: Sony Pages: 34

Brand: Sony Pages: 40

Brand: Sony Pages: 44

Brand: Sony Pages: 52

Brand: Sony Pages: 57

Brand: Sony Pages: 60

Brand: Sony Pages: 150

Brand: Sony Pages: 150

Brand: Sony Pages: 132

Brand: Sony Pages: 208

Brand: UNAVi Pages: 26

Brand: Weathermatic Pages: 2

Brand: Xomax Pages: 34

Brand: Xomax Pages: 34

Brand: Axis Car Audio Pages: 12

Brand: Pyle Pages: 1

Brand: Pyle Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands