Motrex HAVN-100HMCIS, User Manual

Page: 26 / 84

1-24
APPENDIX
5. APPENDIX
Possible Cause
The volume level is set at the lowest level.
The connector is not properly connected.
The device is currently fast-forwarding,
rewinding, scanning, or playing in slow mode.
Solution
Adjust the volume level.
Check the connection state.
The sound will not work when the device is fast-forwarding,
rewinding, scanning, or playing in slow mode.
Problem
The sound does not
work.
The sound or video
quality is low. The DISC is dirty or scratched.
Vibration is occurring from the position in which
the conversion switch has been installed.
The color and tone quality of the image is low.
Wipe off water or dirt from the DISC. Do not use a disc which has
been scratched.
The sound may be short-circuited and the image distorted if the
device begins to vibrate. The device will return to normal
operation once the vibration has stopped.
Aging of the video display and deterioration in performance
may cause certain degradations in quality.
Subtitles are not included in the current playing
DVD.
The subtitle language has been set to "OFF". The subtitles cannot be played.
Set the subtitle language on the desired language.
Subtitles do not work.
The DVD currently being played has
disabled the hide subtitle function. The subtitle cannot be turned off. Subtitles do not turn off.
A language which is not supported by the
current playing DVD has been selected. A language not supported by the DVD cannot be played. The selected sound or
subtitle language
cannot be used.
Only one language is included in the current
playing DVD.
The current playing DVD only supports one
language. The language cannot be changed if the DISC does not support
multi-languages.
The language cannot be changed.
The sound or subtitle
language does not
change.