3. OPERATIONS I / REMOTE CONTROL
18
Version SPAC
ER 1
95 EN V1.0 / 362
2-1
6111
7
3.2. REMOTE CONTROL
Q1
schwarz
black
S3
DK9
schwarz
black
S2
DK27
schwarz
black
DK10
S9
S4
DK
7
6
S3
S1
S2
S9
grün
green
DK1/2
S1
T
T
S6
DK
4
5
T
T
STOP
S0
DK31(S/NO)
DK32(Ö/NC)
rot
red
S8
S7
2
3
4
1
yell
ow
red
gree
n
gree
n
tor
bel
g
nür
g
nür
g
(D
K2
8)
(D
K2
9)
H2
H3
H1
H0
Nm
S5
T
DK
12/3
T
11/3
P-
P+
Emergency
Stop Switch
Forward
Backward
Left
Right
A
F
J
G/H
I
N
L
M
O
K
B
C
D
E
A.
Green LED shows that the Mototok is switched on.
B.
This switch for the sliding table can be pushed upwards (sliding table
moves backwards) and downwards (sliding table moves forward). The
switch jumps back automatically to the middle position. When actuating
the switch, the sliding table will be moved towards the tire of the nose
wheel until the hydraulic push button switches off. When the hydraulic
push button has switched and the elevating platform has not been raised,
it is not possible to drive. The driving function is interrupted until the plat-
form is located in the upper final raised position.
C.
Switch C moves the four nose wheel securing arms. The wheel securing
arms move hydraulically to the nose wheels and hold them in a fixed and
secured position.
D.
Touch switch for headlights and working lights.
E.
Nonstop flashing red LED light shows a connection loss. If the LED flashes
very fast, the radio transmission to the vehicle is malfunctioning. If the
LED slowly fades out, there is an interruption of the CANBUS transmission
from the remote control to the control board.
F.
Green LED – shows the established connection between transmitter and
receiver (fast flashing)
G.
Pos. 1, 2 and 3: Tracking camera off
H.
Pos. 4: Tracking camera on
I.
Rotary switch – sets the velocity to slow (snail) or fast (rabbit)
J.
Green control LED to indicate that the fastest speed has been selected.
K.
On/off switch for remote control. By turning the black rotary knob the
vehicle is switched on. The black rotary knob can be pulled out and is a
key. If the key switch is turned clockwise, two acoustic signals will sound,
which means that the remote control has found a free channel. Now only
the green reset button
N
has to be pushed and the vehicle is ready for use.
L.
Switch for the orange beacon
M.
Button for mouth door open and door close. If the button is pushed repeat-
edly, the door moves in the opposite direction.
N.
The green button must always be pushed after switching on the remote
control. It is used for controlling the safety systems. The safety systems
have to go through a function test before every start-up. If there is no
RESET (green button) the Mototok does not react to the joystick or any
other button command.
O.
Button for raising and lowering the lifting platform. Raising the lifting
platform is done by clicking twice within 0.5 seconds as with a computer
mouse. When the platform is up, it can be lowered by clicking once. If the
platform is lowered, the sliding table moves back automatically.
Property of American Airlines