ZIM12-00505 Rev. 1
TransTech IV Service Manual
14
BASIC OPERATION (CONT’D)
Pause Feature
If service needs to be paused at any time press STOP. To resume, press
START/RESUME. The machine will pause indefinitely until the START/RESUME
button
is pressed. While paused, fluid will flow through the machine in a bypass loop.
Adding ATF to Clean Tank
It is recommended that the desired amount of clean ATF to be exchanged is added to
the Clean Tank before a service begins. However, additional ATF can be added after a
service has started but ONLY when the service is paused. Any ATF added while the
unit is performing a service will not be properly measured and may result in an OVER
FILL of the vehicle’s transmission!
