ZIM12-00505 Rev. 1
TransTech IV Service Manual
16
BASIC OPERATION (CONT’D)
6. Press START/RESUME
button to begin service.
7. The DRAIN
light is on solid. Initial drain cycle begins.
8. Once fluid flow has stopped, service pauses, FILL
light flashes. The operator
can continue with service or remove the drain pan if drain pan service is
required.
9. Press FILL
button to continue service. The unit will refill the same amount of
fluid that was drained from the transmission oil pan. After the initial Fill
sequence, the unit will pause and the START ENGINE light will flash.
10. Start the engine.
11. Press the START/RESUME
button to continue the service to completion.
12. The COMPLETE light will turn on when the service is complete and alarm will
sound. Press STOP
button to silence alarm.
13. Remove the Dipstick fill adaptor and check the level of transmission fluid in
the vehicle.
